Sabrent 4TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD SB-RKT4P-4TB

In stock

The Sabrent 4TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD Extreme Performance Solid State Drive (SB-RKT4P-4TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

Compare
SKU: IGO-20221010-1397 Category:

NVMe M.2 PCIe Gen4 x4 Interface. PCIe 4.0 Compliant / NVMe 1.3 Compliant.
Power Management Support for APST / ASPM / L1.2.
Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.
The Sabrent 4TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD Extreme Performance Solid State Drive (SB-RKT4P-4TB) delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

Based on TLC NAND Flash memory, its performance speeds can reach up to 7100 MB/s (read) and 6600 MB/s (write) when using a PCIe Gen4 motherboard. Using a PCIe Gen3 Motherboard Speeds will reach up to 3400 MB/s (read) and 3000 MB/s (write). Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems.

The Sabrent 4TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 7100 MB/s (read) and 6600 MB/s (write), significantly faster than PCIe 3.0.

Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at pcie gen 3 speed at max of 3500MB/s.
When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance.

The Sabrent 2TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3400 MB/s (read) and 3000 MB/s (write).

Features:

‰Û¢ NVMe M.2 PCIe Gen4 x4 Interface.
‰Û¢ PCIe 4.0 Compliant / NVMe 1.3 Compliant.
‰Û¢ Power Management Support for APST / ASPM / L1.2.
‰Û¢ Supports SMART and TRIM commands.
‰Û¢ Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
‰Û¢ Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
‰Û¢ Upgradeable Firmware.

Package contents:

‰Û¢ 4TB Rocket 4+ Nvme PCIe 4.0 M.2 2280 SSD.
‰Û¢ User Manual.

Specification :

Model
Brand Sabrent
Series Rocket 4 Plus
Model SB-RKT4P-4TB
Device Type Internal Solid State Drive (SSD)
Used For Consumer
Details
Form Factor M.2 2280
Capacity 4TB
Memory Components 3D TLC NAND
Interface PCI-Express 4.0 x4
Controller Phison PS5018-E18
Performance
Max Sequential Read Up to 7100 MBps
Max Sequential Write Up to 6600 MBps
MTBF 1,600,000 hours
HeatSink No
Environmental
Operating Temperature 0å¡C ~ +70å¡C
Storage Temperature -40å¡C ~ +85å¡C
Max Shock Resistance 1500G
Dimensions & Weight
Height 3.60mm
Width 22mm
Depth 80mm

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

X

Main Menu

Sabrent 4TB Rocket 4 PLUS NVMe 4.0 Gen4 PCIe M.2 Internal SSD SB-RKT4P-4TB